Company Advantages1. For the fabrication of SANDAO epoxy adhesive , our professionals make use of high-grade raw materials.
2. Our quality control personnel are responsible for the continuous small changes to maintain production in the specified parameters and ensure product quality.
3. This product must go through our quality inspector's internal quality assurance procedure to ensure non-defective quality.
4. Huizhou SANDAO New Material Co., Ltd has a wealth of engineering experience with qualified professional and technical personnel.
5. Huizhou SANDAO New Material Co., Ltd has established a strict quality management system and operating procedures.
Sandao High temperature resistant epoxy resin AB adhesive SD829
Sandao High temperature resistant epoxy resin AB adhesive SD829 is a two component high temperature resistant adhesive based on epoxy resin. It has high shear peeling strength, good toughness, waterproofing, corrosion resistance ,weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, Extreme temperature and excellent electrical insulation. Self-leveling, suitable for filling, bonding and sealing.
Sandao high temperature resistant epoxy resin AB adhesive SD829 is used for bonding metals, plastics, rubber, glass, electroplating / baking paint / magnetic materials, such as for aircraft, motor, etc.
Electroplating paint bonding
Epoxy resin AB glue | SD829 part A | SD829 Part B |
Appearance /color | milky | black |
Viscosity (mPa.s 25℃) | 26000-28000 | 26000-28000 |
Specific gravity (g/ml 25℃) | 1.6-1.9 | 1.6-1.9 |
Ratio(weight ratio pbw) | 1 | 1 |
Gel time under normal temperature(25℃)20g | 1h |
Curing condition | 80℃ | 30 mins |
Temperature range(℃) | -30℃-180℃ |
Hardness(shore-D) | 85/100 |
Epoxide equivalent(g/eq) | 185/190 | / |
Active hydrogen equivalentg/eq | / | 185/195 |
Distortion temperature HDT | 80℃ |
Distortion temperature HDT | 5.0~1015 |
Surface resistivity(Ω.cm)25℃ | 4.0×1015 |
Shear strength of different materials(Mpa) |
Aluminum / copper | 17-20 |
Steel | 18/23 |
ABS | 7-8 |
High temperature epoxy resin AB glue
SD829 high temperature resistant epoxy resin AB glue is an epoxy resin based two component high temperature adhesive.
Milky /black
It's high shear strength, good toughness, waterproof, non-corrosive and other weak acid and alkali resistance, extreme temperature and excellent electrical insulativity properties.
Eco-environmental protection
Odorless, non-pollution, anti-shock, resistant to most chemical media.
AB mixing tube
packaging specifications: 64g /tube.
Caution
1. AB glue is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
bg
AB glue is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods. It should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.
Company Features1. Huizhou SANDAO New Material Co., Ltd is a professional customized ab glue manufacturer.
2. epoxy ab glue is more competitive for its high quality in this industry.
3. To serve customers wholeheartedly is an unremarkable responsibility of SANDAO. Call now! [拓展关键词 is an important part of Huizhou SANDAO New Material Co., Ltd. Call now! Huizhou SANDAO New Material Co., Ltd pays attention to train our staff from time to time for new technology. Call now! Huizhou SANDAO New Material Co., Ltd's corporate culture needs continuous innovation and development on the basis of adhering to epoxy adhesive . Call now!