high-quality MS adhesive series glue for fixing products

Product Comparison

Good materials, advanced production technology, and fine manufacturing techniques are used in the production of silicone rubber. It is of fine workmanship and good quality and is well sold in the domestic market.Compared with other products in the same industry, SANDAO New Material's silicone rubber has the following characteristics.

Enterprise Strength

SANDAO New Material has established a complete sales network to provide quality services for customers.

Company Advantages
1. Scientific production: the production of SANDAO ms polymer adhesive is scientifically managed. A strict real-time monitoring system is carried out during each production step to make sure zero error of its quality.
2. The product is resilient to vibration and impact. It has been manufactured by casting, milling, or forging to be more resilient.
3. Residences, offices, supermarkets, or hotels are normally full of appliances that need lots of energy, however, using this product definitely helps cut electricity costs.

our product

high-quality MS adhesive series glue for fixing products-1

Healthy antimicrobial and anti-mildew adhesive SD858

In daily life, black mold breeding phenomenon everywhere, not only caused the pollution of the living environment, but also long-term harm to people's physical and mental health;

Sandao Healthy antimicrobial and anti-mildew adhesive D858 is a professional anti-mildew antibacterial sealant, compared with the ordinary anti-mildew gel on the market, D858’s polymer structure can more effectively inhibit the breeding of mold, the protection time is longer.

There is no formaldehyde, no toluene, no solvent, no isocyanate, no toxic and tasteless, the content of volatile organic compounds （VOC）is almost 0, the product itself is healthy and environmental protection, the mildew prevention performance is longer, more outstanding.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

high-quality MS adhesive series glue for fixing products-2

Bathroom

high-quality MS adhesive series glue for fixing products-3

Bathroom

high-quality MS adhesive series glue for fixing products-4

Cold storage

high-quality MS adhesive series glue for fixing products-5

hospital

high-quality MS adhesive series glue for fixing products-6

kitchen

high-quality MS adhesive series glue for fixing products-7

window gap bonding

product Performance

Type	SD858
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

high-quality MS adhesive series glue for fixing products-8

SD858 Antibacterial and Antifungal Adhesive

SD858 is a professional anti-mildew and anti-bacterial sealant. The macromolecule structure can more effectively inhibit the growth of mildew, and the protection time is longer.

high-quality MS adhesive series glue for fixing products-9

Light yellow

The polymer network structure firmly locks the antibacterial property, inhibits the growth of mold, and has a longer aging time.

high-quality MS adhesive series glue for fixing products-10

Green environmental protection

Formaldehyde free, no toluene, no solvent, no isocyanate, non-toxic and tasteless

high-quality MS adhesive series glue for fixing products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Huizhou SANDAO New Material Co., Ltd boasts years of experience in designing and manufacturing ms polymer adhesive. We become known as a reliable manufacturer in the industry.
2. The company is licensed with production and business qualification. The certificate can set customers' minds at rest because customers can see accountability and check the product quality throughout the supply chain.
3. The business philosophy of our company is 'innovation in product, dedication to service.' Under this philosophy, the company develops steadily with growing influence in the industry. Inquiry! Our company is at the forefront of sustainable development. By implementing measures to minimize resource utilization and installing integrated waste treatment facilities, the company is able to ensure that we do our part to protect the natural environment. Inquiry!

q******u

The quality control of SANDAO MS adhesive series strictly complies with the regulations of ceramic tableware industry, including the raw materials and the workmanship of glaze decoration. It is designed to maximize capacity and to distribute the load evenly

d******d

SANDAO ms polymer adhesive is rigorously checked for fatigue resistance of shoe heels, attachment strengths of decorative, peel strength of footwear sole bonds, and slip resistance. It is ideal for such floors as wood, laminate, ceramic, terracotta or carpeted

e******a

SANDAO ms polymer adhesive has to be inspected to ensure that it has enough physical strength which enables it to withstand wear and shock force. It is especially suitable for food service trolleys and medical equipment

f******u

The manufacturing of SANDAO ms polymer adhesive is carried out through the following processes: metal materials preparation, turning, milling, boring, welding, marking, and assembling. Corrosion resistant materials make it suitable for harsh environments

b******g

Before the SANDAO MS adhesive series is stored or shipped, the finishing operations and inspection remain to be performed following curing. The finishing operation trims flash or excess rubber. The wheel provides the perfect combination of softness, durability, and grip

f******p

It has good strength. Its materials have the required toughness to resist deformation under stress and resist fracture due to high impact load. Its soft wheel prevents damage to the floor during use

Product Message

*Name

Phone

*E-mail

*Content