high-quality MS adhesive series building manufacturer for electrical products

Product Comparison

silicone rubber, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.Compared with products in the same category,SANDAO New Material's silicone rubber's outstanding advantages are as follows.

Company Advantages
1. ms polymer adhesive plays a great role in MS adhesive series.
2. This product has the required hand-feel. Its fabrics feature enough softness, stiffness, bending rigidity, smoothness, and compressibility.
3. This product has the required safety. Different requirements regarding architecture and risk classification of this product have been considered carefully in the manufacture.
4. With this product, business owners can know exactly which items they have sold on daily or monthly bases, how many items are in the warehouse or how much money they have made.

our product

high-quality MS adhesive series building manufacturer for electrical products-1

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

high-quality MS adhesive series building manufacturer for electrical products-2

Cabinet corner bonding

high-quality MS adhesive series building manufacturer for electrical products-3

Electrical bonding

high-quality MS adhesive series building manufacturer for electrical products-4

Electronic Components

high-quality MS adhesive series building manufacturer for electrical products-5

kitchen

high-quality MS adhesive series building manufacturer for electrical products-6

Window bonding

high-quality MS adhesive series building manufacturer for electrical products-7

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

high-quality MS adhesive series building manufacturer for electrical products-8

MS-SD818 General purpose sealant

high-quality MS adhesive series building manufacturer for electrical products-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

high-quality MS adhesive series building manufacturer for electrical products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

high-quality MS adhesive series building manufacturer for electrical products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. SANDAO New Material is a high-tech enterprise specializing in the production of ms polymer adhesive.
2. Huizhou SANDAO New Material Co., Ltd has powerful technical advantage and strong research and development capacities.
3. Following years of attempts in the MS adhesive series manufacturing business, SANDAO is worthy of your trust. Check now! In our company, sustainability goes far beyond reducing carbon emissions or paper usage — it's about embedding the business practices that enable us to do more good and make positive contributions to the people with which we work. Check now! Huizhou SANDAO New Material Co., Ltd aims to create a sustainable business with you! Check now!

t******s

The main components of ms polymer adhesive are imported products.

l******u

ms polymer adhesive is especially fits for the usage in ms polymer adhesive.

x******a

The material of MS adhesive series allows ms polymer adhesive to make it ms polymer adhesive.

j******o

MS adhesive series are likely to possess features like MS adhesive series.

f******m

MS adhesive series adopts ms polymer adhesive materials, generate features such as ms polymer adhesive.

u******m

The product has the advantage of enough hardness. It has the property to resist pressing-in or scratch of a sharp object.

Product Message

*Name

Phone

*E-mail

*Content