Company Advantages1. The current international advanced surface treatment technology is used for SANDAO Thermal conductive material TDS production. It has a wide range of properties that include chemical resistance
2. This product is viewed as the ideal screen owing to its superb quality and very pocket-friendly cost. Basically, it is worth every penny spent on it. After curing, it can be waterproof, dampproof, and dustproof
3. An internal team or a third-party team is hired to determine whether the product meets the standards. It is a very strong impregnation product
4. Our Thermal conductive material TDS has higher performance than other similar products. It has excellent electrical insulation performance
5. You can make special adjustments on our Thermal conductive material TDS. After curing, it can withstand torque without breaking
High temperature resistant heat conductive silicone grease SD920
High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
Performance | Test data |
Appearance | Gray paste |
Penetration degree(1/10mm,25℃) | 280~340 |
Specific gravity(g/cm3) | 2.6-3.0 |
Bleed(%。150℃,8h) | ≤2.0 |
Fugitive constituent(%。150℃,8h) | ≤2.0 |
Break down strength(kv/mm) | ≥2.0 |
Volume resistivity(Ω.cm) | 4×1014 |
Thermal conductivity(w/m·k) | ≥2.0 |
General purpose thermal grease
SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.
Gray paste
Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.
Iron bottle packaging
packaging specifications: 1.0kg / can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
Caution
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
bg
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Company Features1. Huizhou SANDAO New Material Co., Ltd is a leading supplier and manufacturer in the global market Thermal conductive material TDS. We introduced advanced Thermal conductive material TDS equipment, which produce high quality products with sophisticated design and fine finish.
2. With the increasing demand of the society to Thermal conductive material TDS, SANDAO has been persistently researching and developing new products.
3. With the experienced team who are experienced in manufacturing Thermal conductive material TDS, SANDAO is able to provide better products. Supplying the highest grade Thermal conductive material TDS is what SANDAO tries to perform. Inquiry!