SANDAO  >  AI - Page Sitemap  >  high-energy bonding adhesive Silicone for electronic products
high-energy bonding adhesive Silicone for electronic products

high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products
  • high-energy bonding adhesive Silicone for electronic products

high-energy bonding adhesive Silicone for electronic products

With a large-scale factory and professional production line, Huizhou SANDAO New Material Co., Ltd is considered a reliable supplier of bonding adhesive.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • After years of sincerity-based management, SANDAO New Material runs an integrated business setup based on the combination of E-commerce and traditional trade. The service network covers the whole country. This enables us to sincerely provide each consumer with professional services.
Company Advantages
1. SANDAO glue has been tested for many times. These tests have been conducted in terms of power, efficiency, service life, strength, stiffness, anti-friction, wear and tear, vibration stability, etc.
2. The quality of the product can stand the test of time.
3. The continuously quality service shows Huizhou SANDAO New Material Co., Ltd's ability.

our product

bg


high-energy bonding adhesive Silicone for electronic products-1
SD401A Cyanoacrylate adhesive      

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

 

Feature

  • ◪   General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

     

Application

bg


It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

high-energy bonding adhesive Silicone for electronic products-2

Leather bonding

high-energy bonding adhesive Silicone for electronic products-3

Metal bonding

high-energy bonding adhesive Silicone for electronic products-4

Plastic bonding


high-energy bonding adhesive Silicone for electronic products-5

Furniture bonding

high-energy bonding adhesive Silicone for electronic products-6

Rubber bonding

high-energy bonding adhesive Silicone for electronic products-7

Silica gel bonding



product Performance

bg


Before curing 
Appearancetransparent
Viscosity(mPa.s)>300
density(g/c㎡)1.05
After curing
Shear strength(Mpa)>24
Temperature range(℃)-55~85
Curing time (s)15
Maximum filling gap (mm)0.1

Product details

bg
high-energy bonding adhesive Silicone for electronic products-8
SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.


high-energy bonding adhesive Silicone for electronic products-9
Transparent

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

high-energy bonding adhesive Silicone for electronic products-10
Green environmental protection
Low odor, no pollution.
high-energy bonding adhesive Silicone for electronic products-11
Packing
This product is packaged in plastic with 20g/ bottles or 1000g/ bottles;

Use instructions

bg


  • Using process:

  • 1) Use a dry cloth or abrasive paper to remove surface dust, oil agent, steel embroidery, then wipe and clean with acetone or trichloroethylene.

  • 2) Open the front cover, flick tip by finger, make no residual liquid, and then poke open by using needle. 

  • 3) Drop a little glue to the surface, adhesive immediately and keep to hardening, curing time is few seconds to few minutes; reach the practical strength within 30mins,  strength, reach the highest strength within 1-2 hours; 

  • 4) After use, wipe the tip, cover the lid. 


Caution

  • 1.   The vapour of this glue will hurt eyes.

  • 2.   If hand touched, wash clean by using soap, water, pumice, otherwise it can curing in hand after a while, it will recede after a few days.

  • 3.   Avoid contact of eyes and skin. Wash immediately with water and consult a doctor immediately in case of accident.


Packaging and preservation

bg


This product is packaged in plastic with 20g/ bottles or 1000g/ bottles.

 The product should be stored in dry shade place (below 25 ℃).

The shelf time is 6 month. 





Company Features
1. With a large-scale factory and professional production line, Huizhou SANDAO New Material Co., Ltd is considered a reliable supplier of bonding adhesive.
2. Our manufacturing plant adopts a production control system. The objective of this system is that the highest efficiency in production is obtained by producing the required in time and in the best and cheapest method possible.
3. We make efforts to contribute to communities and society. We develop locally when possible, work closely with local businesses and employ local people to promote socio-economic development. We take social responsibility in our business operations. We encourage employees to work together and leverage their core competencies to lead and engage in different initiatives to address key social and environmental issues. The company always adheres to the principle of 'customer first'. We keep up with customers' demands to ensure that products follow fashion, lead the trend, and have market value.
SANDAO glue has been tested to meet a series of safety and quality regulations. It is certified under RoHS, CE, CCC, SAA, UL, and other related electric standards. The stretch fabrics provide the maximum elastic for the product
SANDAO glue is carefully developed. It is carried out by the R&D team who takes many factors into considerations such as radiated emissions, radiated susceptibility, ESD (electrostatic discharge), electrical transients, etc. The product is spliced and has the performance of wear resistance
SANDAO glue goes through several production stages, including the fabrication and solder of the circuit board, surface treatment, insulation testing, assembly, and commissioning. The neat stitching gives the product a high-end style
The production process of SANDAO bonding adhesive mainly includes three parts. These parts, namely, sizing processing, glaze processing, and quality inspection, are all conducted under strict control and inspection. It is suitable for spring, summer, and autumn seasons
SANDAO bonding adhesive meets a variety of international standards for electric appliances. They are CARB, FCC, ETL, UL, CB, CCC and so on. Adopting breathable fabrics, it can provide a comfortable wearing experience for the chef
The product is shrinkage resistant. During the fabric pre-treatment stage, the fabrics have been shrunk already to prevent further shrinkage. It is manufactured to withstand the toughest kitchens and cooking endeavors
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...