Visual inspections for SANDAO two part adhesive have been conducted. They include the check for an untrimmed thread, shading variance between different pieces of the same style or different parts of the same piece, and loose needles. It has been widely used in electronic device manufacturing2.
It will be hard for people to find any loose threads or defective seams and stitching occurring on this product. Its viscosity differs depending on the material, performance and production process3.
The product is renowned for its sophisticated workmanship. All edges are finely rounded and the surface is handled to achieve desired smoothness. Strong weather resistance makes attribute to its long service life4.
The product has good colorfastness. It is not susceptible to the influence of external sunlight exposure nor the ultraviolet ray. It should be fully cured before realizing its use value
Sandao epoxy resin AB adhesive SD805
Sandao epoxy resin AB adhesive SD805 is a two-component high-temperature resistant adhesive based on epoxy resin. It has the advantages of fast drying, high strength, weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation. Mainly suitable for high temperature resistant metal, ceramic, etc.
◪ Fast curing, high viscosity, high strength, impact resistance, high insulation, transparent, low smell, no corrosion.
◪ Epoxy resin AB sealant can resist most chemicals and solvents.
◪ Temperature-resistant -40-120 ℃.
Sandao fast drying Epoxy resin AB sealant are used for bonding of metal, ceramic, glass, electroplating / paint / magnetic materials, such as aircraft motor, automobile, machinery, ship, electronics, electrical apparatus, instrument, building, furniture, toys,. high temperature resistant parts such as railway vehicles ,etc, AB glue can also be used to adhesive water tank, oil road, carburetor, cylinder cover, exhaust pipe, bushing of driving shaft, plastic parts such as baffle, vehicles lamp glass, car handle, etc.
Electroplating paint bonding
Mechanical component bonding
|Epoxy resin AB glue||SD805 part A||SD805 part B|
|Viscosity (mPa.s 25℃)||8000-15000||11000-18000|
|Specific gravity (g/ml 25℃)||1.0-1.05||1.0-1.05|
|Ratio（weight ratio pbw）||1||1|
|Gel time under normal temperature（25℃）20g||5mins|
|Active hydrogen equivalent g/eq||/||185/195|
|Distortion temperature HDT||80℃|
Shear strength of different materials（Mpa）
|Aluminum / copper||15-18|
Quick-drying transparent epoxy resin AB glue
SD805 epoxy resin AB adhesive is a two-component high temperature adhesive based on epoxy resin, which is suitable for high temperature ceramic metal bonding.
Fully transparent and trace-free, epoxy resin is resistant to most chemicals and solvents and is resistant to temperatures from -40 to 120 °C.
Green environmental protection
odorless, non-corrosion, non-pollution, fast curing, high viscosity, high strength, impact resistance, extreme temperature and excellent electrical insulativity properties.
AB mixing tube
packaging specifications:64g / tube.
Put on AB glue gun and put on the thread mixing head. The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation.
Do not mix the lid of A and B to prevent contamination of the adhesive.
1. AB adhesive is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
Epoxy resin AB adhesive is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Huizhou SANDAO New Material Co., Ltd has proven expertise in testing and evaluating raw materials and finished products.2.
Huizhou SANDAO New Material Co., Ltd has strong technical force and advanced production technology.3.
Thanks to the good service of our staff, SANDAO has been recognized by more customers. Check now!