Thermal conductive material TDS | Thermal conductive material TDS

our product

General type heat conductive silicone grease SD910

General type heat conductive silicone greaseSD910 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

General type heat conductive silicone grease SD910-2

High power triode

General type heat conductive silicone grease SD910-3

LED heat dissipation gap filling

General type heat conductive silicone grease SD910-4

Oven gap filling

General type heat conductive silicone grease SD910-5

Power module

General type heat conductive silicone grease SD910-6

Thyristor component

General type heat conductive silicone grease SD910-7

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	270～340
Specific gravity（g/cm3）	2.6-3.0
Bleed（%。150℃，8h）	≤3.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥5.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥1.0

Product details

General type heat conductive silicone grease SD910-8

General purpose thermal grease

SD910 Universal Thermal Grease is a one-component silicone thermal grease Based on imported silicone.

General type heat conductive silicone grease SD910-9

Gray paste

Non- toxic, non- corrosive, tasteless, non - drying, non - soluble, no air - drying hardening or melting.

General type heat conductive silicone grease SD910-10

Green environmental protection

High temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulation, good service stability.

General type heat conductive silicone grease SD910-11

Iron bottle packaging

packaging specifications: 1.0kg /can

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Having been engaged in the production of Thermal conductive material TDS for many years, Huizhou SANDAO New Material Co., Ltd has large capacity and experienced team.
2. To meet customer's requirements, SANDAO always keeps the innovative technology to produce Thermal conductive material TDS.
3. SANDAO always adheres to Customer First . Ask! We're a professional Thermal conductive material TDS provider who plans to earn a wonderful influence in this market. Ask!

r******q

SANDAO gas resistant rtv is manufactured by our experts using advanced technology with superior grade materials.

b******y

The whole production of SANDAO gas resistant rtv has been greatly optimized to meet different needs.

x******p

SANDAO Thermal conductive material TDS is high-quality and with an innovative design.

a******z

Our Thermal conductive material TDS is professionally designed.

x******g

The shapes of Thermal conductive material TDS are different and can be customized.

c******w

Compared with other Thermal conductive material TDS, gas resistant rtv integrated advantages of Thermal conductive material TDS.

Product Message

*Name

Phone

*E-mail

*Content