Company Advantages1. SANDAO what is rtv silicone is of professional graphic design. Our team of talented graphic designers crafts the perfect design, integrating customers' brand into the visual aesthetic of this product.
2. It has the ability to keep the same color without fading or running even if washed, placed in harsh light, exposed to perspiration or treated with certain chemicals.
3. The product is easy to set up and adjust. The inter-locking keys at one end allow it to be properly and easily fixed after unfolding.
4. Whether the motivations are economic, environmental, or personal, the benefits of this product will have something to offer for everyone.
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
Type | SD916 | SD9201 | SD920 |
Color | white | white | white |
Viscosity(cp) | paste | paste | semi-fluid |
Density(g/cm3) | 2.0~2.5 | 2.0~2.5 | 3.0~3.5 |
Tack-free time(25℃,min) | ≤30 | ≤30 | ≤30 |
Tensile strength (MPa) | ≥2.5 | ≥2.5 | ≥2.5 |
Elongation(%) | ≥100 | ≥100 | ≥100 |
Shear strength(MPa) | ≥1.5 | ≥1.5 | ≥1.5 |
Hardness (shore A) | 50~65 | 50~65 | 50~65 |
Temperature range(℃) | -60~280 | -60~280 | -60~280 |
Dielectric intesity(kV/mm) | ≥18 | ≥18 | ≥18 |
Permittivity(@60Hz) | 2.8 | 2.8 | 2.8 |
Volume Resistance(Ω.cm) | 1×1015 | 1×1015 | 1×1015 |
Thermal conductivity(w/(m.k)) | 1.2 | 0.8 | 2.0 |
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Eco-environmental protection
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
White paste
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
Notes:
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Company Features1. SANDAO has won more and more praise for its highest quality One-component RTV silicone rubber TDS.
2. With years of commitment to the concept of quality, we have won a number of loyal customers and established stable cooperations with them. This is the evidence of our strong capability in improving product quality.
3. We are working toward building and maintaining sustainable operations, products, and communities by focusing on the risks and opportunities that are most important to our stakeholders and business success. Our company is always committed to serving our customers whole-heartedly and help them to manufacture the accurate products they want. Ask online! We spur sustainability. Responding to tomorrows urgency today, we continuously enhance our policies and practices to ensure the good health and safety of all persons, ecosystems, and communities we touch. Huizhou SANDAO New Material Co., Ltd is committed to serving the best interests of our customers.