what is rtv silicone | One-component RTV silicone rubber TDS

Product Information of Flame-retardant silica gel SD9088W

Enterprise Strength

SANDAO New Material's initial intention is to provide service that can bring customers comfortable and secure experience.

Company Advantages
1. The design of SANDAO One-component RTV silicone rubber TDS helps create individual highlights.
2. Stability is one of its advantages. It can run under rigorous conditions such as extreme weather conditions or sudden blackout.
3. The product has optimized heat dissipation performance. Thermal adhesive or thermal grease is filled to the air gaps between the product and the spreader on the device.
4. Taking into account the company's existing advantages in the international market, Huizhou SANDAO New Material Co., Ltd's future development prospects are worth looking forward to.

our product

Flame-retardant silica gel SD9088W

Flame-retardant silica gel SD9088W is an alcohol type one-component room temperature vulcanized silica gel with white/black paste, excellent insulation and good adhesion. Moisture-proof, shock-proof, corona-resistant, and anti-leakage.

Application

Flame-retardant silica gel is used for the power supply's subsequent filling and sealing, electronic and electrical components are fixed and flame-retardant, insulated and sealed waterproof, environmentally friendly, non-corrosive materials.

Electrical circuit board

Power Adapter

Electrical components

CPU bonding

Semiconductor material bonding

Electronic circuit board

product Performance

Type	SD9088W
Name	Test value
Color	white/black paste
Density(g/cm3)	1.3～1.35
Tack-free time（25℃,min）	3～10
Tensile strength（MPa）	≥2.0
Elongation（%）	200～300
Shear strength（MPa）	≥2.0
Hardness(shore A)	50～60
Temperature range（℃）	-50～250
Permittivity（@60Hz）	2.9
Dielectric intesity（kV/mm）	≥20
Volume Resistance（Ω.cm）	0¹⁵2.0×1
Flammable	V-0

Product details

Flame retardant silicone

SD9088W (flame retardant silica gel) is an alcohol type one-component room temperature vulcanized silica gel; it has excellent insulation and good adhesion.

Eco-environmental protection

Neutral non-corrosive, odorless, non-pollution, anti-vibration, corona resistance, anti-leakage, no harmful substances.

White\grey paste

After curing, it has excellent moisture resistance and excellent flame retardant performance to the substrate, and the flame retardant performance reaches UL 94 v-0

Metal hose packaging

Packing specification: 100g/tube, 310ml/cartridge

Use instructions

The surface of the substrate must be degreased and dried, and corona treatment can improve the bonding effect.
The silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.

Notes:

1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. SANDAO manufacturer is a particularly popular One-component RTV silicone rubber TDS manufacturer.
2. Our factory member employs accumulated unique know-how on advanced production methods, which helps us earn the trust of many domestic and overseas companies in the field.
3. To ensure that we all act with the utmost standards, we have created an environmental policy for everyone to adhere to. The environmental policy is under the direct control of the managing director of the company. Welcome to visit our factory! We have a unique set of strategic objectives. At this moment, we will upgrade customers services level and find more approach to cater to customers' needs or improve customers' satisfaction. In so doing, we hope to expand the business scope. Currently, we are committed to getting more customers. Under this, we change the way we get along with our customers. We improve customer engagement, reassess our service solution, and developing products more targeted. In this way, we are confident to get big-name customers.

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

Five important factors affecting thermal conductivity of silicone grease

1. Types and characteristics of polymer matrix materials The higher thermal conductivity of matrix materials, the better the dispersion of filler in matrix, the better the combination of matrix and filler, and the better thermal conductivity of thermal composites.2. Type of filler The higher thermal conductivity of the filler, the better thermal conductivity of the composites.3. Shape of filler the sequence of thermal conduction pathways are fibrous , flake and granular, the easier the filler is to form thermal conduction pathways, the better thermal conductivity.4. Content of fillerThe distribution of filler in polymer determines the thermal conductivity of composite. When the content of filler is small, the effect of heat conduction is not obvious. When there is too much filler, the mechanical properties of the composites will be greatly affected. When the content of the filler increases to a certain value, the interaction between the filler forms a network or chain chain in the system. When the direction of the chain is consistent with the direction of heat flow, the thermal conductivity is best. Therefore, there is a critical value of the quantity of heat conducting filler.5. Bonding characteristics of filler and matrix material interface .The higher the degree of binding between the filler and matrix, the better the thermal conductivity. The suitable coupling agent is used for surface treatment of the filler, and the thermal conductivity can be increased by 10%-20%.

How to remove organic silica gel ?

First,it’s very easy to remove and clean when the silicone rubber uncured. No matter it’s in human body, utensils or clothing,just wash it by water. Second,it’s very difficult to remove organic silica gel after curing, If solidified gel is cohere to glass, ceramics, metals and so on, you can clean it with solvents such as xylene and acetone. If you don't know these two kinds of substances. Banana water can be considered, because banana water contains these two kinds of substances, If there is less organic glue attached to objects such as glass, you can also try scraping it off with a scraper. If cohere to cloth, try to use brush, if not ok, choose banana water. Third, it is easy to deal with if silicone rubber cohere on hands. Organic silicone will not stick to the hand after cured, so we can remove it by rub hands.

Solution to bubbles in epoxy resin potting compound

During the filling process, the problem of bubbles in the capacitor after filling is often encountered, which may be due to the following reasons:1. Bubbles come when mixing and pottingIt is very easy to bring air into the glue because of the large viscosity of glue or wrong stirring. If the viscosity of glue is large, the bubble is difficult to eliminate. If the glue viscosity is small, the glue solidifies slowly, the bubble will slowly float to the surface to eliminate automatically. In order to eliminate the bubbles in the process of glue filling, the bubbles can be eliminated by vacuuming, heating to reduce viscosity, adding diluent to reduce viscosity or adding defoamer. Pls choose the best way for yourself. 2. Bubbles come during curingThere are also several reasons for the formation of bubbles in the curing process: the curing speed is too fast, the exothermic temperature is high, the shrinkage of the glue is large, too much plasticizer and solvent in the glue.these are easy to produce bubbles in the curing process. Epoxy resin sealant is widely used in electronic products such as transformers, capacitors and so on. Its main functions are moisture-proof, water-proof, oil-proof and dust-proof. It also has excellent resistance to moisture, heat and aging. By virtue of these advantages, it occupies a considerable advantage in the field of electronic encapsulation.

High heat conductively grease features

As heat conducting material, silica gel can quickly absorb heat and give off heat.The higher the thermal conductivity of the silicone is, the more effective it is in transmitting heat from your processor to the radiator.Thus reducing the technical difference between the radiators and the radiating structure components which requires the effect of shock absorption, installation, testing, and the convenience of repeated use.