◪ Fast curing, high viscosity, high strength, impact resistance, high insulation, transparent, low smell, no corrosion.
◪ Epoxy resin AB sealant can resist most chemicals and solvents.
◪ Temperature-resistant -40-120 ℃.
Sandao fast drying Epoxy resin AB sealant are used for bonding of metal, ceramic, glass, electroplating / paint / magnetic materials, such as aircraft motor, automobile, machinery, ship, electronics, electrical apparatus, instrument, building, furniture, toys,. high temperature resistant parts such as railway vehicles ,etc, AB glue can also be used to adhesive water tank, oil road, carburetor, cylinder cover, exhaust pipe, bushing of driving shaft, plastic parts such as baffle, vehicles lamp glass, car handle, etc.
Glass bonding
Electroplating paint bonding
Ceramic bonding
Motor component bonding
Mechanical component bonding
Furniture bonding
Epoxy resin AB glue | SD805 part A | SD805 part B | ||
Appearance /color | transparent | transparent | ||
Viscosity (mPa.s 25℃) | 8000-15000 | 11000-18000 | ||
Specific gravity (g/ml 25℃) | 1.0-1.05 | 1.0-1.05 | ||
Ratio(weight ratio pbw) | 1 | 1 | ||
Gel time under normal temperature(25℃)20g | 5mins | |||
Curing condition | / | / | ||
Temperature range(℃) | -40℃-120℃ | |||
Hardness(Shore-D) | 73/80 | |||
Epoxide equivalent(g/eq) | 185/190 | / | ||
Active hydrogen equivalent g/eq | / | 185/195 | ||
Distortion temperature HDT | 80℃ | |||
Volume resistivity(Ω.cm)25℃ | 5.0×1016 | |||
Surface resistivity(Ω.cm)25℃ | 7.5×1012 | |||
Shear strength of different materials(Mpa) | ||||
Aluminum / copper | 15-18 | |||
Steel | 16/19 | |||
ABS | 6-7 |
Put on AB glue gun and put on the thread mixing head. The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation.
Do not mix the lid of A and B to prevent contamination of the adhesive.
1. AB adhesive is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Epoxy resin AB adhesive is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.