Some necessary tests have been conducted on SANDAO ge rtv silicone. These tests are strength testing, durability testing, shock resistance testing, structural stability testing, material&surface testing, and contaminants & harmful substances testing. 2.
The product is not only powerful but also durable, and has a longer life than other competing products. 3.
The quality of this product is guaranteed because it has passed international certification such as ISO certification. 4.
There is well-established service system for our Two-component addition-type potting adhesive TDS.
Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105
Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105 is suitable for long-term protection of sensitive circuits or electronic components, with stable dielectric insulation, the elastomer formed after curing is in a large range of temperature and humidity; Eliminating stresses from shocks and vibrations. It can maintain the original physical and electrical properties under various working conditions. This item has good chemical stability, easy to clean and remove after filling. in order to repair the electronic components. Excellent temperature resistance, can be used at-50 ℃ for a long period of time, fully in accordance with the European Union ROHS, can pass through the UL94-V0 fire-proof class.
SD6105 is used for sealing and potting of LED Street Light driving Power supply, LED spot light Power supply Module, Electroplating Power supply, Power Rectifier, Transformer, Generator PCB, oven and other High heating and fire prevention products, as well as large Power Electronic components, Coating protection of electronic modules and circuit boards which with high requirements for heat resistance and heat dissipation.
LED spotlight power module
LED street light drive power supply
|Before curing||Part A||appearance||black||white||gray|
|Part B||appearance||White liquid||White liquid||White liquid|
|Curing type||bi-component additive type||bi-component additive type||bi-component additive type|
|Viscosity after mix（cps)||3500～5500||3000～5500||3000～5500|
|Curing time（min 25℃)||480||480||480|
|Curing time（min 80℃)||20||20||20|
|tensile strength (Mpa)||＜1.50||＜1.50||＜1.50|
|shear strength (Mpa)||2.00||2.00||2.00|
|dielectric strength (KV/·㎜)||≥27||≥27||≥27|
|Leakage resistance index（V)||600||600||600|
|thermal conductivity [W/(m·K)]||0.80||0.80||0.80|
|inflaming retarding property||UL94-V0||UL94-V0||UL94-V0|
Mark: The above properties were measured at room temperature.
Thermally conductive flame retardant potting sealant
SD6105 is a two component 1:1 cross-linking by reaction, gray, solidified into a high performance elastomer.
It has stable dielectric insulation properties, temperature resistance, good chemical stability, and easy to clean and remove after potting.
Non-corrosion, non-pollution and EU RoHS standard with flame resistance UL94-V0
Plastic barrel seal
packaging, protective glue, 10kg /set (component A/ 5kg .component B/5kg), shelf life of 12 months.
1. Weighting: Accurate weighing the part A and part B. (stir A and stir B separately before weighting, Evenly redistribute slightly subsided fillers into glue.)
2. Mix glue: B component is added to A component and mixed evenly;
3. Remove air bubbles: The evenly mixed rubber material is placed in the vacuum cabinet to remove foaming;
4. Pouring: After air bubbles removed, pouring the glue into the parts and components for potting; (the surface of the parts and the mixing container before pouring should be clean and dry, do not contact with the compounds such as N、P、S、Sn、Pb、Hg、As, so as not to affect the solidification.
5. Curing: solidification of a potting part at room temperature or heated.
Packaging and preservation
10kg/ set (5kg component A plus 5kg component B), this product is nontoxic, non-dangerous goods, transported according to general chemicals, stored in a cool (room temperature) dry place, shelf life last for 12 months.Company Features1.
Huizhou SANDAO New Material Co., Ltd is one of the reliable manufacturers of ge rtv silicone in China. Our in-depth understanding of this industry and product have helped us achieve this distinction. 2.
The company is endowed with an excellent product management team. They often come up with effective selling solutions by working together and brainstorming ideas. 3.
SANDAO has a great goal to be a booming Two-component addition-type potting adhesive TDS supplier. Contact us! Attaching importance of customer service will be beneficial to the development of SANDAO. Contact us! Huizhou SANDAO New Material Co., Ltd has the power to shape a bright future with Two-component addition-type potting adhesive TDS together with you. Contact us!