loading
SANDAO  >  AI - Page Sitemap  >  Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341

Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341
  • Epoxy resin potting sealant SD6341

Epoxy resin potting sealant SD6341

The Two-component addition-type potting adhesive TDS in Huizhou SANDAO New Material Co., Ltd is diverse and competitive in market.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • SANDAO New Material has built a comprehensive service model with advanced concepts and high standards, so as to provide systematic, efficient and complete services for consumers.
Application Scope
SANDAO New Material's silicone adhesive can be used in a variety of industries.With rich manufacturing experience and strong production capability, SANDAO New Material is able to provide professional solutions according to customers' actual needs.
Company Advantages
1. The physical structure of Two-component addition-type potting adhesive TDS is pretty unique with ge rtv silicone.
2. The product is super easy to clean. The product itself is naturally non-stick because of its extremely smooth surface done by glazing.
3. Huizhou SANDAO New Material Co., Ltd provides one-stop sourcing services with wide range of products.

our product

bg


Epoxy resin potting sealant SD6341-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

Epoxy resin potting sealant SD6341-2

air conditioning

Epoxy resin potting sealant SD6341-3

heat sink

Epoxy resin potting sealant SD6341-4

Induction cooker bonding


Epoxy resin potting sealant SD6341-5

PCB board bonding

Epoxy resin potting sealant SD6341-6

Power module

Epoxy resin potting sealant SD6341-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
Epoxy resin potting sealant SD6341-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
Epoxy resin potting sealant SD6341-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Epoxy resin potting sealant SD6341-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Epoxy resin potting sealant SD6341-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. The Two-component addition-type potting adhesive TDS in Huizhou SANDAO New Material Co., Ltd is diverse and competitive in market.
2. Huizhou SANDAO New Material Co., Ltd constantly improves its technological progress.
3. To carry forward ge rtv silicone is the base of Huizhou SANDAO New Material Co., Ltd's work. The work on intensifying the service idea of ge rtv silicone has never been stopped by Huizhou SANDAO New Material Co., Ltd. Inquire now! The essence in service creed of Huizhou SANDAO New Material Co., Ltd is ge rtv silicone. Inquire now!
SANDAO Two-component addition-type potting adhesive TDS is made with suitable materials. The designer determines the material according to the goods. For example, if the displayed goods are heavy, the better choice is wood/wire/plastic material.
In the production of SANDAO Two-component addition-type potting adhesive TDS, fabrics which boast international certificates and meet regulations that are particularly important to the environment and human health are used.
The production process of SANDAO Two-component addition-type potting adhesive TDS begins with a rigorous inspection of all incoming raw materials. The materials have been tested for color, grade, and composition.
Strict electrical safety tests are required for SANDAO Two-component addition-type potting adhesive TDS. It will be tested by professional testing organizations with regards to its electric performance, the safety of power source, and the whole insulating performance.
SANDAO ge rtv silicone has to pass through a series of rigorous tests in a lab environment. For example, its electrical components and accessories have to be tested to comply with health and safety standards.
This product is known for its system reliability. It can perform the same task endlessly in the same way without loss.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...