Company Advantages1. SANDAO epoxy adhesive fully complies with the relevant product safety Standard that governs it. It goes through a robust program of product testing, factory inspection, and on-going product surveillance to ensure safety. Water absorption and coefficient of linear expansion of this product are small
2. In terms of market share, it will greatly increase in the next few years. It features high thermal stability and excellent wear resistance
3. 2 part epoxy adhesive have highly marketable properties such as epoxy adhesive . It is a very strong impregnation product
4. Owing to epoxy adhesive , SANDAO has gained much more popularity than before. It has excellent electrical insulation performance
Sandao High temperature resistant epoxy resin AB adhesive SD829
Sandao High temperature resistant epoxy resin AB adhesive SD829 is a two component high temperature resistant adhesive based on epoxy resin. It has high shear peeling strength, good toughness, waterproofing, corrosion resistance ,weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, Extreme temperature and excellent electrical insulation. Self-leveling, suitable for filling, bonding and sealing.
Sandao high temperature resistant epoxy resin AB adhesive SD829 is used for bonding metals, plastics, rubber, glass, electroplating / baking paint / magnetic materials, such as for aircraft, motor, etc.
Electroplating paint bonding
Epoxy resin AB glue | SD829 part A | SD829 Part B |
Appearance /color | milky | black |
Viscosity (mPa.s 25℃) | 26000-28000 | 26000-28000 |
Specific gravity (g/ml 25℃) | 1.6-1.9 | 1.6-1.9 |
Ratio(weight ratio pbw) | 1 | 1 |
Gel time under normal temperature(25℃)20g | 1h |
Curing condition | 80℃ | 30 mins |
Temperature range(℃) | -30℃-180℃ |
Hardness(shore-D) | 85/100 |
Epoxide equivalent(g/eq) | 185/190 | / |
Active hydrogen equivalentg/eq | / | 185/195 |
Distortion temperature HDT | 80℃ |
Distortion temperature HDT | 5.0~1015 |
Surface resistivity(Ω.cm)25℃ | 4.0×1015 |
Shear strength of different materials(Mpa) |
Aluminum / copper | 17-20 |
Steel | 18/23 |
ABS | 7-8 |
High temperature epoxy resin AB glue
SD829 high temperature resistant epoxy resin AB glue is an epoxy resin based two component high temperature adhesive.
Milky /black
It's high shear strength, good toughness, waterproof, non-corrosive and other weak acid and alkali resistance, extreme temperature and excellent electrical insulativity properties.
Eco-environmental protection
Odorless, non-pollution, anti-shock, resistant to most chemical media.
AB mixing tube
packaging specifications: 64g /tube.
Caution
1. AB glue is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
bg
AB glue is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods. It should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.
Company Features1. Our factory features a reasonable layout. It ensures a smooth flow of work, material, and information and enhances our factory's overall operation both in terms of maximizing the effectiveness of the production process.
2. Huizhou SANDAO New Material Co., Ltd always hold epoxy adhesive at work, and always meticulous about production process. Contact us!