SANDAO  >  AI - Page Sitemap  >  environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts
  • environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts

SANDAO ge rtv silicone is manufactured complying with international electrical standards. All its parts, including cables, plug, and electric components are tested under professional equipment.
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
SANDAO New Material's ms adhesive is widely used in various industries and fields.SANDAO New Material insists on providing customers with reasonable solutions according to their actual needs.
Product Details
SANDAO New Material pays great attention to details of ms adhesive. ms adhesive is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.
Company Advantages
1. SANDAO ge rtv silicone is manufactured complying with international electrical standards. All its parts, including cables, plug, and electric components are tested under professional equipment.
2. The improved quality management system guarantees the higher quality of this product.
3. This product has fetched high demands in the market.
4. It can resist the heavy pressure of competition and has a broad market prospect.

our product

bg


environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-1
Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105
Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105 is suitable for long-term protection of sensitive circuits or electronic components, with stable dielectric insulation, the elastomer formed after curing is in a large range of temperature and humidity; Eliminating stresses from shocks and vibrations. It can maintain the original physical and electrical properties under various working conditions. This item has good chemical stability, easy to clean and remove after filling. in order to repair the electronic components. Excellent temperature resistance, can be used at-50 ℃ for a long period of time, fully in accordance with the European Union ROHS, can pass through the UL94-V0 fire-proof class.

Application

bg


SD6105 is used for sealing and potting of LED Street Light driving Power supply, LED spot light Power supply Module, Electroplating Power supply, Power Rectifier, Transformer, Generator PCB, oven and other High heating and fire prevention products, as well as large Power Electronic components, Coating protection of electronic modules and circuit boards which with high requirements for heat resistance and heat dissipation.

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-2

Generator circuit board

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-3

LED spotlight power module

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-4

Sealed potting


environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-5

Plating power supply

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-6

LED street light drive power supply

environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-7

Transformer



product Performance

bg


Item610561056105
Before curingPart Aappearanceblackwhitegray
viscosity(cps)3500~55003500~55003500~5500
relative density(g/cm³)1.10~1.151.10~1.151.10~1.15
Part BappearanceWhite liquidWhite liquidWhite liquid
viscosity(cps)3500~55003500~55003500~5500
relative density(g/cm³)1.10~1.151.10~1.151.10~1.15
A:B(ratio)1:11:11:1
Curing typebi-component  additive typebi-component additive typebi-component additive type
Viscosity after mix(cps)3500~55003000~55003000~5500
Operate time(min)55~8055~8055~80
Curing time(min 25℃)480480480
Curing time(min 80℃)202020
After curinghardness(ShoreA,24hr)40~5540~5540~55
tensile strength (Mpa)<1.50<1.50<1.50
shear strength (Mpa)2.002.002.00
Linear Shrinkage(%)0.30.30.3
temperature range(℃)-60~260-60~260-60~260
volume resistivity(Ω·m³)1.0×10161.0×10161.0×1016
dielectric strength (KV/·㎜)≥27≥27≥27
dielectric constant(1.2MHz)3.23.23.2
Leakage resistance index(V)600600600
thermal conductivity [W/(m·K)]0.800.800.80
inflaming retarding propertyUL94-V0UL94-V0UL94-V0

Mark: The above properties were measured at room temperature.

Product details

bg
environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-8
Thermally conductive flame retardant potting sealant
SD6105 is a two component 1:1 cross-linking by reaction, gray, solidified into a high performance elastomer.
environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-9
Gray solid
It has stable dielectric insulation properties, temperature resistance, good chemical stability, and easy to clean and remove after potting.
environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-10
Eco-environmental protection
Non-corrosion, non-pollution and EU RoHS standard with flame resistance UL94-V0
environmental  Two-component addition-type potting adhesive TDS organic  supply for metalparts-11
Plastic barrel seal
packaging, protective glue, 10kg /set (component A/ 5kg .component B/5kg), shelf life of 12 months.

Use instructions

bg


Caution

  • 1.   Weighting: Accurate weighing the part A and part B. (stir A and stir B separately before weighting, Evenly redistribute slightly subsided fillers into glue.)

  • 2.   Mix glue: B component is added to A component and mixed evenly;

  • 3.   Remove air bubbles: The evenly mixed rubber material is placed in the vacuum cabinet to remove foaming;

  • 4.   Pouring: After air bubbles removed, pouring the glue into the parts and components for potting; (the surface of the parts and the mixing container before pouring should be clean and dry, do not contact with the compounds such as N、P、S、Sn、Pb、Hg、As, so as not to affect the solidification.

  • 5.   Curing: solidification of a potting part at room temperature or heated.


Packaging and preservation

bg


10kg/ set (5kg component A  plus 5kg component B), this product is nontoxic, non-dangerous goods, transported according to general chemicals, stored in a cool (room temperature) dry place, shelf life last for 12 months.


Company Features
1. Huizhou SANDAO New Material Co., Ltd has a huge advantage with large factories and takes a leading position in ge rtv silicone industry.
2. Huizhou SANDAO New Material Co., Ltd has skilled mechanical personnel and experienced management personnel.
3. Our company is striving for green manufacturing. Rigorous conservation and efficiency programs minimize the use of natural resources and reduce greenhouse gas emissions. Our company culture is: we will be always passionate about doing the right thing for employees and giving them a great working experience so that they can push their boundaries of potential.
SANDAO Two-component addition-type potting adhesive TDS is developed professionally by our R&D team who have many years of experience in the battery industry. Parameters such as electrolyte types, metal ingredients, and battery cells have been considered respectively. This product is CE and RoHS certified
SANDAO ge rtv silicone has to be processed with fine finishing so as to eliminate the impurities to further develop its full gloss potential. It is suitable for a wide variety of goods, such as snacks, beverages, stationery, toys, medicine, and adult porn products
The safety of SANDAO ge rtv silicone is guaranteed. It has been tested with regards to fire resistance rating by the third-party testing laboratory. The stiff foam between the outer cabinet and internal tank adds structural stability
SANDAO Two-component addition-type potting adhesive TDS is strictly inspected. It will be ensured that the edges are uniform around all sides and be reviewed from multiple angles. It is designed with voice prompts function
SANDAO Two-component addition-type potting adhesive TDS is the outcome of comprehensive know-how. It is developed under these several considerations: electric control system, electromagnetism, insulation materials selection, the design of printed circuit boards, and so on. The stiff foam between the outer cabinet and internal tank adds structural stability
The product will not shrink when washed. Its materials have been relaxed and contracted prior to manufacturing so as to no further shrinkage. It is equipped with high-performance sensors for bill validation
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...