SANDAOOne-component RTV silicone rubber TDS is designed by the elite design team based on user demand. Its curing exothermic peak is low and the curing shrinkage is small2.
Having set foot in One-component RTV silicone rubber TDS industry, SANDAO began to focus on the service provided and quality of products. It is resistant to high temperature and low-temperature alternation3.
This product comes with moisture and mold resistance, making it ideal for these high humidity areas by reducing the effect of water on the surfaces. In some cases, it can achieve flame retardant, weathering, and thermal conductivity properties4.
It supports its own weight and the loads imposed on it (such as wind loads, seismic loads, and so on) which it transfers back to the primary structure of the building. It features high thermal stability and excellent wear resistance5.
The product is characterized by its adaptable configurations. The track and carrier system provides ease of operation and directional flexibility. It has good adhesion to a variety of materials
LED bulb lamp adhesive sealant SD911
LED bulb lamp adhesive sealant SD911 (quick dry silicone sealant) is a kind of quick adhesive for LED lamp, automotive lampshade, solar photovoltaic module and TPT/TPE back film etc. With excellent insulation, good adhesion, moisture proof, anti-seismic, Corona resistance, anti-leakage. The adhesive has good adhesion to metal and most plastics, and has excellent resistance to cold and heat (- 50 ~ 250 ℃) after curing.
◪ no fog, release alcohol substances when curing.
◪ Using in polycarbonate (PC), copper and other materials, non-corrosive, non-irritating gas release; fully in accordance with the requirements of the European Union ROHS Directive.
◪ It has good adhesion and aging resistance to many kinds of materials. The properties are stable at -50 ℃ and 250 ℃.
1.This silicone sealant is used for bonding and waterproof sealing of barrier pipe in optoelectronic industry.
2.used for bonding and sealing LED bulb lamp, automobile lamp, underwater lamp, washing lamp, hard lamp bar, engineering plastic, metal, glass and ceramics
3.used for bonding ,strengthening and moisture-proof sealing of electronic components on electronic circuit board.
|Appearance||Colorless, translucent and semi-fluid||Colorless translucent paste|
|Hardness (shore A)||25～30||25～30|
SD911 LED Bulb Bond Adhesive
SD911 (Quick-drying silicone sealant) series is a kind of LED lighting, quick-bonding LED bulb, energy-saving lamp and lamp shell bonding and sealing surface.
Colorless translucent semi-flowing
Excellent insulation, good adhesion, moisture, shock, corona, and leakage resistance. It has excellent resistance to cold and heat exchange (-50~250°C) after curing.
Non-corrosive, non-irritating gas release; in line with EU ROHS directive requirements. Good adhesion to a variety of materials, good aging resistance.
Shelf life is 12 months,packing specification: 45g /tube, 300ml /tube.
Clean the surface of objects which to be sticky or coated, remove rust, dust and oil.
First prick the rubber pipe with the cap tip, put the tip on, squeeze the glue into the cleaned surface, distribute it evenly, and fasten the adhesive surface together.
The coated parts are placed in air and solidified at room temperature for 24 hours.
After the operation is completed, the silicone sealant should tighten the cap immediately and seal and save. When reusing, if there is a little skin seal, remove it,this will not affect the normal use.
Packaging and preservation
Packing specification: 45g/pcs, 300ml/ pcs or as required by customer.
Storage: stored in a cool and dry place for 12 months.
The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you. Company Features1.
Huizhou SANDAO New Material Co., Ltd has supplied a range of customers for many years. We are specialized in the production of what is rtv silicone.2.
We have first-class production testing and research facilities. These highly efficient facilities are introduced from developed countries. The facilities provide a solid foundation for product quality and production capability.3.
Huizhou SANDAO New Material Co., Ltd will provide quality services to fully meet the needs of customers. Check now!