effective rtv silicone rubber long-term-use for screws

Application Scope

SANDAO New Material's ms adhesive has been widely used in many industries.Guided by the actual needs of customers, SANDAO New Material provides comprehensive, perfect and quality solutions based on the benefit of customers.

Enterprise Strength

SANDAO New Material has always been committed to meeting customers' needs and improving service for many years. Now we enjoy a good reputation in the industry due to honest business, quality products, and excellent services.

Company Advantages
1. Supported by highly proficient workers, SANDAO rtv silicone rubber is delicately crafted and has an aesthetically-pleasing appearance.
2. Annual recertification audits verify that its quality standards are maintained.
3. It does not need special treatment or designated cleaning methods. It is easy to care with just a simple and proper washing method.

our product

effective rtv silicone rubber long-term-use for screws-1

Thermal conductive silica gel SD916

Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

effective rtv silicone rubber long-term-use for screws-2

Microwave oven adhesive seal

effective rtv silicone rubber long-term-use for screws-3

Radiator filling and bonding

effective rtv silicone rubber long-term-use for screws-4

Refrigerator bonding seal

effective rtv silicone rubber long-term-use for screws-5

Semiconductor material bonding

effective rtv silicone rubber long-term-use for screws-6

Thyristor filling and bonding

effective rtv silicone rubber long-term-use for screws-7

CPU bonding

product Performance

Type	SD916	SD9201	SD920
Color	white	white	white
Viscosity（cp）	paste	paste	semi-fluid
Density（g/cm3）	2.0～2.5	2.0～2.5	3.0～3.5
Tack-free time（25℃，min）	≤30	≤30	≤30
Tensile strength (MPa)	≥2.5	≥2.5	≥2.5
Elongation（%）	≥100	≥100	≥100
Shear strength（MPa）	≥1.5	≥1.5	≥1.5
Hardness (shore A)	50～65	50～65	50～65
Temperature range（℃）	-60～280	-60～280	-60～280
Dielectric intesity（kV/mm）	≥18	≥18	≥18
Permittivity（@60Hz）	2.8	2.8	2.8
Volume Resistance（Ω.cm）	1×10¹⁵	1×10¹⁵	1×10¹⁵
Thermal conductivity（w/(m.k)）	1.2	0.8	2.0

Product details

effective rtv silicone rubber long-term-use for screws-8

Thermal conductivity paste

SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.

effective rtv silicone rubber long-term-use for screws-9

Eco-environmental protection

Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.

effective rtv silicone rubber long-term-use for screws-10

White paste

After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.

effective rtv silicone rubber long-term-use for screws-11

Metal hose packaging

Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is at the leading position in the industrial field.
2. SANDAO has always adhered to independent innovation technology and established its own core business.
3. Huizhou SANDAO New Material Co., Ltd has won recognition from more customers due to the excellent service. Call! Huizhou SANDAO New Material Co., Ltd will continue to enhance the core competitiveness of enterprises. Call!

r******i

SANDAO rtv silicone rubber is delicately manufactured by the use of cutting edge technology. Made of high-quality materials, the product is easy to use and maintain

h******e

The production process of SANDAO rtv silicone is documented to guarantee consistent and accurate production. The product seizes the market share in over 20 countries, mainly in the USA, UK, Korea, and Russia

j******x

SANDAO rtv silicone is manufactured by our experienced workers who use optimum raw materials. The product comes with a stylish and fashionable design

y******i

SANDAO rtv silicone rubber is manufactured according to the international advanced production practice - lean production and by use of internationally-sourced high-quality materials. It features outstanding workmanship that proves to be delicate

s******i

SANDAO rtv silicone is manufactured utilizing the finest materials and the latest production technology. The product is assembled with AB glue which improves high-temperature resistance

m******c

The functions of SANDAO product can meet and exceed customer expectation. The bristles do not fall out during the makeup application process

Product Message

*Name

Phone

*E-mail

*Content