effective rtv silicone rubber bulb manufacturer for substrate

Company Advantages
1. Electric indicators for SANDAO rtv silicone rubber are required to check carefully. Its electromagnetic compatibility, static, harmonic, and other electric issues which may affect the operation of other devices will be handled properly. It is a very strong impregnation product
2. The product is popularized due to its stable utilization. It is moisture-proof and shock-resistant
3. It has the required colorfastness. The type of dye, the amount of dye, the way it binds to the fabric, and the dyeing process contribute to this characteristic. During its solidification process, the powder components do not delaminate
4. It has good moisture permeability. Its raw materials have good hygroscopic properties, allowing water or moisture to pass easily. It has a wide range of properties that include chemical resistance
5. This product has the advantage of softness. The treated material is smooth and the chemical softener is used to absorb excess impurities. The product has good aging resistance

our product

effective rtv silicone rubber bulb manufacturer for substrate-1

RTV Silicone adhesive SD903-1

RTV Silicone adhesive SD903-1 is a high temperature resistant silicone adhesive. It’s red viscous liquid with excellent insulation, good adhesion, moisture resistance, shock resistance, corona resistance and leakage resistance. The silicone adhesive has good adhesion to metals and most plastics, and has excellent resistance to cold and heat exchange after curing.

Application

The organic RTV silicone adhesive is used for coating protection, bonding positioning and reinforcement of electronic components on electronic circuit board, and moisture-proof sealing. Waterproof sealing of all kinds of instruments and shallow potting of miniature electronic components and modules.

effective rtv silicone rubber bulb manufacturer for substrate-2

Electronic component bonding

effective rtv silicone rubber bulb manufacturer for substrate-3

Electronic instrument housing bonding

effective rtv silicone rubber bulb manufacturer for substrate-4

Glass bonding

effective rtv silicone rubber bulb manufacturer for substrate-5

Shallow potting of the module

effective rtv silicone rubber bulb manufacturer for substrate-6

Semiconductor material bonding

effective rtv silicone rubber bulb manufacturer for substrate-7

Ceramic bonding

product Performance

Type	SD903-1	SD903
Color	Red paste	Red semi-fluid
Density(g/cm3)	1.3～1.5	1.2～1.3
Tack-free time（25℃,min）	≤30	≤30
Tensile strength（MPa）	≥2.0	≥2.0
Elongation（%）	250～350	250～350
Shear strength（MPa）	≥1.5	≥1.5
Hardness(shore A)	40～50	35～45
Temperature range（℃）	-60～315	-60～260
Dielectric constant（@60Hz）	2.8	2.8
Dielectric strength（kV/mm）	≥20	≥20
Volume Resistance（Ω.cm）	1.0×10¹⁵	1.0×10¹⁵

Product details

effective rtv silicone rubber bulb manufacturer for substrate-8

Organic silicone adhesive

SD903-1 is a high temperature resistant silicone adhesive that is placed in the air to allow it to cure naturally.

effective rtv silicone rubber bulb manufacturer for substrate-9

Eco-environmental protection

Neutral Non-corrosive, Non odor, Non pollution, excellent insulation, good adhesion

effective rtv silicone rubber bulb manufacturer for substrate-10

Red paste

Excellent resistance to cold and heat alternation after curing, moistureproof, anti-shock, corona-resistance, and leakage resistance.

effective rtv silicone rubber bulb manufacturer for substrate-11

Hard plastic tube seal

Packing specification: 310ml /Cartidge.

Use instructions

1. Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
2. Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
3. The coated parts are placed in the air and allowed to stand at room temperature for 24 hours.

Packaging and preservation

Notes:
1.Keep thermal adhesive out of reach of children.
2.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. As a developing company, Huizhou SANDAO New Material Co., Ltd has been developing into manufacturing rtv silicone rubber .
2. Equipped with a group of professional technical and management team who strive to cooperate with clients to supply perfect products for them, the company is cultivating more such professionals.
3. Huizhou SANDAO New Material Co., Ltd uses what is rtv silicone for the purpose of tenet. Call now!

a******u

SANDAO what is rtv silicone has been strictly assessed. The assessments include whether its design is in compliance with the taste and style preferences of consumers, decorative function, aesthetics, and durability.

j******g

The quality of SANDAO rtv silicone rubber is guaranteed by different quality standards. The overall performance of this product meets requirements stipulated in GB18580-2001 and GB18584-2001.

f******o

Quality-related problems of SANDAO what is rtv silicone have been overseen during the manufacturing phase. These problems are sewing quality, color consistency, and fabric defects.

z******u

The flow chart of SANDAO rtv silicone rubber manufacturing is as followed: fit sample making, fabric cutting, cutting parts sorting or bundling, sewing, ironing, and laundering.

r******y

SANDAO rtv silicone rubber is designed by professional furniture designers. They approach the product from a practical point of view as well as aesthetics view, making it in line with the space.

p******h

Under the control of strict quality management system, the product is bound to be of a quality that conforms to the industry standard.

Product Message

*Name

Phone

*E-mail

*Content