SANDAO rtv silicone is manufactured adopting the latest energy-conserving technologies. It has been certified under China CECP, a domestic energy keeping certification which aims to verify its energy efficiency level. The product has good aging resistance2.
Huizhou SANDAO New Material Co., Ltd's One-component RTV silicone rubber TDS is SGS compliant. Its quality directly benefits the service life of the products that use it3.
It is endowed with important fabric properties for maintaining thermal comforts, such as air permeability, water or moisture (vapor) permeability/transportation and heat transmission. Its viscosity differs depending on the material, performance and production process
Silicone adhesive sealant SD906
Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.
The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.
Microwave oven adhesive seal
Refrigerator bonding seal
Semiconductor material bonding
|Color||Colorless transparent ||white||black|
|Tensile strength (MPa)||2.0||2.0||2.0|
One-component RTV silicone rubber
SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber
Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.
Milky white paste
After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.
100g/tube 310ml/cartridge 2.6L/bottle
The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.
Packaging and preservation
Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.
Storage: stored in a cool and dry place for one year.
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
SANDAO is skilled at producing One-component RTV silicone rubber TDS. Our rtv silicone rubber has a strong competence as a seller of One-component RTV silicone rubber TDS with high quality.2.
Huizhou SANDAO New Material Co., Ltd is based on market demand and relies on technological innovation.3.
By applying traditional and modern technology, the quality of One-component RTV silicone rubber TDS is superior than similar type of products. The development and growth of Huizhou SANDAO New Material Co., Ltd can not be separated from the customer's support and trust. Ask!