SANDAO One-component RTV silicone rubber TDS is carefully engineered at a materials level. Factors such as reflectivity, diffusion, texture, and elasticity are taken into serious consideration. 2.
The product features enough traction. The outsole effectively makes contact with the ground and the grooves and treads can help maintain traction. 3.
The product helps reduce electronic waste (e-waste) globally. Most of its components and parts are recyclable and reusable for many times. 4.
By integrating what is rtv silicone and rtv silicone together, SANDAO can provide highly effective and high quality One-component RTV silicone rubber TDS.
silicone rubber special adhesive SD9091
Silicone adhesive SD9091 is a kind of silicone adhesive which can be bonded silica gel with silica gel. It is colorless and translucent viscous liquid, excellent insulation, good adhesion, bonding directly without special treatment. high strength, Slow dry type, good softness of adhesive area after curing, moisture-proof, anti-seismic, corona resistance, anti-leakage resistance, anti-cold and hot alternating property (-60 ~ 260 ℃).
◪ Bonding silica gel directly without special treatment. high strength, slow dry type, soft adhesive area after curing, align the adhesive surface for 10 minutes, after gluing, put 24 hours to stick firmly.
◪ Sensitive material will not be corrosive, not white.
1) The silicone special adhesive is used for adhesive bonding silica gel with plastic, silica gel with metal, silica gel with silica gel etc.
2) The silicone special adhesive is widely used for silicone mobile phone case, silicone toys, cartoon silicone, silicone sealed tube etc.
3) Bonding and moisture proof seal of Silicon Gel with hardware.
Silicone and plastic bonding
Silicone and silicone bonding
|Appearance||Colorless transparent semi-fluid||Black semi-fluid|
|Tack-free time （25℃,min）||5～10||5～10|
|Hardness (shore A)||8～15||8～15|
Silicone rubber special adhesive
SD9091 silicone series is a kind of silicone adhesive which can be used to bond silicone with silicone.
Neutral non-corrosive, odorless, non-pollution, anti-vibration, corona resistance, anti-leakage, no harmful substances.
Excellent insulation, good adhesion, high strength, slow drying, excellent adhesion area softness after curing.
Metal hose packaging
Packing specification: 100g/tube, 310ml/cartridge
Clean the surface of objects which to be sticky or coated, remove rust, dust and oil.
First prick the rubber pipe with the cap tip, put the tip on, squeeze the glue into the cleaned surface, distribute it evenly, and fasten the adhesive surface together.
The coated parts are placed in air and solidified at room temperature for 24 hours.
1. After the operation is completed, the silicone sealant should tighten the cap immediately and seal and save.
2. When reusing, if there is a little skin seal, remove it. this will not affect the normal use.
Packaging and preservation
Packing specification: 100ml/pcs, 310ml/pcs or as required by customer.
Storage: stored in a cool and dry place for 12 months.
Note: Company Features1.
The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Huizhou SANDAO New Material Co., Ltd develops, manufactures and markets what is rtv silicone for many years. We are recognized as one of the most professional manufacturers in the world. 2.
Our factory is supported by a series of manufacturing facilities. They allow us to offer full-scale production and meet a wide variety of customer and market needs while maintaining the highest possible quality. 3.
We are committed to promoting our sustainable development. We are constantly improving our staff's environmental awareness and put it into our production activities. Our company practices an Environmental Management System (EMS) that focuses on the reduction of the company's environmental footprint. This system helps us have better production process control and utilization of resources. We make efforts to go green. By introducing some advanced manufacturing facilities, we reduce emission during our production and achieve energy conservation.