SD838 all-purpose nail-free adhesive
SD838 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
baseboard clearance
glass bonding
stone bonding
wall drill bonding
wall gap bonding
window gap bonding
Type | SD838 |
Color | yellow |
Viscosity (pa.s) 10rpm | 900 |
Initial curing time(mins) | 30 |
100% modulus (Mpa) | 1.2 |
Elongation at break(N/mm) | 230 |
Tensile strength(MPa) | 1.5 |
The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
JCT fake silicone breast forms planetary mixer
1. Product Function Brief of JCT fake silicone breast forms planetary mixer:
A. Operating principle: There are two or three multi-blade stirrer and one automatic scraper. Agitator runs around the kettle axis, and rotates around its own axis on a different speed at the same time; so that the material in the kettle crashes intricately, strongly sheared and rubbed. Besides, equipment knife scraped the inside wall of kettle, and bring down the material glued to the wall when rotates around the axis, which greatly enhances the effect.
B. Components: Mixing devices, vacuum system, heating devices, cooling system, etc.
C. Widely used in: Ink, paint, adhesives, sealants, filling plastic ointment, paste materials, grease, paste cosmetic, paste food, additives and other compounds of high viscous preparation.
D. Applicable Field: Solid-solid phase, solid-liquid, liquid-liquid materials in the industries of chemical, light industry, food, batteries, pharmaceuticals, building materials, pesticides.
E. Equipped with the Mixer: Hydraulic discharge machine, hydraulic oil station, etc.
F. Superiority: Kettle has special seal structure to vacuum, so that the exhaust can be well expelled. Cylinder jacket can be heated and cooled according to users' needs. Discharging way is pressure fed, cover lifts by hydraulic, and cylinder is free to move, which is easy to operate. And the impeller and the blade can be rise with the beam out of the cylinder, so it is easy to clean.
2. Technical Parameters of JCT fake silicone breast forms planetary mixer:
Model | Volume (L) | Motor Power (KW) | Stirring Speed (rpm) | Vacuum Degree (MPa) | Remarks | |
Revolution | Rotation | |||||
XJB-2 | 2 | 0.75 | 0 - 60 | 0 - 1300 |
-0.098 | The data in this table is only for reference, the actual data can be designed as the detailed requirements and needs. Or decided by the material viscosity and other requirements. |
XJB-5 | 3 | 1.5 | 0 - 60 | 0 - 100 | ||
XJB-20 | 20 | 3 | 0 - 60 | 0 - 100 | ||
XJB-50 | 50 | 5.5 | 0 - 60 | 0 - 100 | ||
XJB-100 | 100 | 7.5 | 0 - 60 | 0 - 100 | ||
XJB-200 | 200 | 15 | 0 - 60 | 0 - 80 | ||
XJB-300 | 300 | 22 | 0 - 60 | 0 - 80 | ||
XJB-500 | 500 | 37 | 0 - 60 | 0 - 80 | ||
XJB-1000 | 1000 | 45-55 | 0 - 60 | 0 - 80 | ||
1). Lifting mode: Hydraulic lift and descend. 2). Heating or cooling can be designed as needs. 3). The pressure range: -0.1 ~ 0.3 MPa 4). Speed control mode: inverter for frequency control |
3. Pictures of JCT fake silicone breast forms planetary mixer
4. Main products produced by JCT fake silicone breast forms planetary mixer
5. Our company
6. Why choose us?
1) Profession
We have focused on this area for over 10 years, and the boss of JCT is a professional engineer who has 20 years' experience in what we are concentrating on!
2) Powerful Team
A 8-experienced-engineer designing team + a 35-skilled-technician team + a 10-passionate-sales team make up the JCT powerful team.
3) Achievement
JCT was set up at 2004, through about 10 years' endeavor, our products has been sold to most important industrial districts in China, such as Guangdong, Shandong, Jiangsu, Zhejiang, Fujian and so on.
And we have edged ourselves into the top 5 in China.
From 2009, JCT started the international marketing. Now, we have set our feet in North America, Europe, South Aria, Africa etc.
7. Our Clients
8. Contact Us
Tel: 0086-0757-86193648/86192189
Fax: 0086-0757-86193658
JCT - Your Trustful Partner In China!
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.