SANDAO ms polymer sealant is manufactured utilizing the finest materials and the latest production technology. 2.
The product will not generate static. During the treatment of the material, it has been treated with the antistatic agent. 3.
The product has excellent mechanical strength and loading capacity. It is treated with die-casting under high-temperature and high-pressure conditions, therefore its structure is firm and tough. 4.
The product helps to boost people's confidence, enhance their beauty and showcase that special beauty to get compliments from others. 5.
The product can be switched on and off as many times as necessary without affecting its performance, even over the long term.
SD838 all-purpose nail-free adhesive
SD838 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
Viscosity (pa.s) 10rpm
Initial curing time（mins）
|100% modulus (Mpa)||1.2|
|Elongation at break（N/mm）||230|
SD838 universal nail-free glue
SD838MS universal nail-free adhesive is a new type of modified silane sealant with a low modulus and high elasticity single component.
The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.
No solvent, environmental protection, odorlessness, instant positioning.
Store in a cool and dry place under normal temperature, storage period is 12 months.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
Huizhou SANDAO New Material Co., Ltd boasts for its highest quality and considerate service. 2.
ms adhesive is assembled by our highly skilled professionals. 3.
The service concept and service mode of Huizhou SANDAO New Material Co., Ltd is ms polymer sealant . Contact! Service is such an important part that will never be neglected for Huizhou SANDAO New Material Co., Ltd. Contact!
SINOLINK Polyurethane silicone sealant grommet breast pu forms