glue | PRODUCT

SD4056 Electronic sealant adhesive

Two-component flame-retardant heat-conductive potting adhesive SD6105

Economical heat conductive silicone grease SD3801

SD103Cyanoacrylateadhesive(superglue)

Product Information
Customer Reviews

Company Advantages
1. Before SANDAO glue leaves a warehouse, every aspect will be analyzed and inspected to make sure that the product is perfect in every way. During its solidification process, the powder components do not delaminate
2. Excellent characteristics make the product have greater market potential. Its quality directly benefits the service life of the products that use it
3. The product features safety. Any spill or accidental release can be quickly identified and detected, because of ammonia's strong odor. After curing, it can withstand torque without breaking
4. This product has reliable physical characteristics. It is rust, corrosion, and deformation resistance, and all these features are contributed to its quality steel. The product features good extrusion properties
5. The product is easy to operate. Changes in operating parameters can be easily made to achieve different storage conditions and temperatures. It is moisture-proof and shock-resistant

our product

SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Feature

◪ General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Application

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

Leather bonding

Metal bonding

Plastic bonding

Furniture bonding

Rubber bonding

Silica gel bonding

product Performance

Before curing
Appearance	transparent
Viscosity(mPa.s)	>300
density(g/c㎡)	1.05
After curing
Shear strength(Mpa)	>24
Temperature range（℃）	-55~85
Curing time (s)	15
Maximum filling gap (mm)	0.1

Product details

SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Transparent

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

Green environmental protection

Low odor, no pollution.

Packing

This product is packaged in plastic with 20g/ bottles or 1000g/ bottles;

Use instructions

Using process:
1) Use a dry cloth or abrasive paper to remove surface dust, oil agent, steel embroidery, then wipe and clean with acetone or trichloroethylene.
2) Open the front cover, flick tip by finger, make no residual liquid, and then poke open by using needle.
3) Drop a little glue to the surface, adhesive immediately and keep to hardening, curing time is few seconds to few minutes; reach the practical strength within 30mins, strength, reach the highest strength within 1-2 hours;
4) After use, wipe the tip, cover the lid.

Caution

1. The vapour of this glue will hurt eyes.
2. If hand touched, wash clean by using soap, water, pumice, otherwise it can curing in hand after a while, it will recede after a few days.
3. Avoid contact of eyes and skin. Wash immediately with water and consult a doctor immediately in case of accident.

Packaging and preservation

This product is packaged in plastic with 20g/ bottles or 1000g/ bottles.

The product should be stored in dry shade place (below 25 ℃).

The shelf time is 6 month.

Company Features
1. SANDAO is a reliable company known for bonding adhesive.
2. Huizhou SANDAO New Material Co., Ltd has a group of bonding adhesive specialist team.
3. Huizhou SANDAO New Material Co., Ltd is a manufacturer with lofty aspirations and good ideals for a worldwide famous bonding adhesive provider. Inquire online!

Favorable rate

100%

Buyer impression

Product Message

*Name

Phone

*E-mail

*Content

社媒暂无评论

conductive glue amelioration for electrical products SANDAO