best MS adhesive series allpurpose supply for fixing products

Application Scope

SANDAO New Material's silicone rubber is widely used in the Manufacturing Chemicals Other Chemicals industry.SANDAO New Material is dedicated to providing professional, efficient and economical solutions for customers, so as to meet their needs to the greatest extent.

Company Advantages
1. A variety of sizes and colors for our MS adhesive series can be selected by you.
2. The product is not easily affected by stains. Its surface is smooth enough to resist any kind of spills such as some acidic liquids like vinegar, red wine, and lemon juice.
3. The product has a stable and constant chemical composition and physical properties which are determined by the internal structure.
4. There is no doubt that without the high-quality customer service, SANDAO could not have been so popular in this market.

our product

best MS adhesive series allpurpose supply for fixing products-1

Healthy antimicrobial and anti-mildew adhesive SD858

In daily life, black mold breeding phenomenon everywhere, not only caused the pollution of the living environment, but also long-term harm to people's physical and mental health;

Sandao Healthy antimicrobial and anti-mildew adhesive D858 is a professional anti-mildew antibacterial sealant, compared with the ordinary anti-mildew gel on the market, D858’s polymer structure can more effectively inhibit the breeding of mold, the protection time is longer.

There is no formaldehyde, no toluene, no solvent, no isocyanate, no toxic and tasteless, the content of volatile organic compounds （VOC）is almost 0, the product itself is healthy and environmental protection, the mildew prevention performance is longer, more outstanding.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

best MS adhesive series allpurpose supply for fixing products-2

Bathroom

best MS adhesive series allpurpose supply for fixing products-3

Bathroom

best MS adhesive series allpurpose supply for fixing products-4

Cold storage

best MS adhesive series allpurpose supply for fixing products-5

hospital

best MS adhesive series allpurpose supply for fixing products-6

kitchen

best MS adhesive series allpurpose supply for fixing products-7

window gap bonding

product Performance

Type	SD858
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

best MS adhesive series allpurpose supply for fixing products-8

SD858 Antibacterial and Antifungal Adhesive

SD858 is a professional anti-mildew and anti-bacterial sealant. The macromolecule structure can more effectively inhibit the growth of mildew, and the protection time is longer.

best MS adhesive series allpurpose supply for fixing products-9

Light yellow

The polymer network structure firmly locks the antibacterial property, inhibits the growth of mold, and has a longer aging time.

best MS adhesive series allpurpose supply for fixing products-10

Green environmental protection

Formaldehyde free, no toluene, no solvent, no isocyanate, non-toxic and tasteless

best MS adhesive series allpurpose supply for fixing products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Based in China, Huizhou SANDAO New Material Co., Ltd has earned a good reputation over the years. We have also accumulated rich experience in manufacturing MS adhesive series.
2. Our professional equipment allows us to fabricate such ms polymer adhesive.
3. We consider that we have the responsibility to grow together with our society. Hence, occasionally we will hold cause-related marketing activities. We will donate to charity (cash, goods, or services) based on our product sales volume. Inquire online! Our company has made great efforts for environmental protection. All of our production processes are strictly controlled and inspected to meet the relevant environmental regulations. Inquire online!

o******q

High-performance raw materials make SANDAO MS adhesive series be the perfect one.

p******n

SANDAO MS adhesive series is provided by a team of highly experienced workers.

x******g

SANDAO ms polymer adhesive is produced by purchasing advanced machines for production.

d******t

The production team with extensive expertise and industry knowledge ensure the production of SANDAO MS adhesive series is carried out efficiently and precisely.

t******p

The production of SANDAO MS adhesive series is of high efficiency with the help of advanced production equipment.

h******d

Its quality can be guaranteed through fully mature quality test.

Product Message

*Name

Phone

*E-mail

*Content