MS adhesive series | MS adhesive series

Product Information
Customer Reviews

Enterprise Strength

SANDAO New Material provides comprehensive and professional services such as design solutions and technical consultations based on the actual needs of customers.

Product Comparison

SANDAO New Material carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce silicone adhesive which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.Compared with other products in the same category, silicone adhesive has more advantages, specifically in the following aspects.

Company Advantages
1. SANDAO ms polymer adhesive fully complies with the relevant product safety Standard that governs it. It goes through a robust program of product testing, factory inspection, and on-going product surveillance to ensure safety.
2. Its certified quality is a highlight. It is produced following the rules of the international quality certification system and has passed related quality certification.
3. Huizhou SANDAO New Material Co., Ltd has scientific management and complete quality inspection and quality assurance measures.
4. With the support of ms polymer adhesive, MS adhesive series has attracted more customers with its high quality.

our product

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

Cabinet corner bonding

Electrical bonding

Electronic Components

kitchen

Window bonding

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

MS-SD818 General purpose sealant

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. It is well-known that SANDAO has enough capability to produce MS adhesive series with high quality.
2. The expert R&D base has helped Huizhou SANDAO New Material Co., Ltd make excellent achievements in the development of MS adhesive series.
3. SANDAO aims to be a globally competitive manufacturer. Please contact. Taking the lead in MS adhesive series industry has been SANDAO striving for. Please contact. Huizhou SANDAO New Material Co., Ltd will continuously carry out technological innovation and product innovation. Please contact.

Favorable rate

100%

Buyer impression