Building adhesives-SD958 super type
MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".
SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
Viscosity (pa.s) 10rpm
Initial curing time（mins）
|100% modulus (Mpa)||1.2|
|Elongation at break（N/mm）||230|
Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.