Professional Ms Adhesive Series Ms Polymer Adhesive Supplier

Product Information
Customer Reviews

Product Details

SANDAO New Material's ms adhesive is perfect in every detail.Under the guidance of market, SANDAO New Material constantly strives for innovation. ms adhesive has reliable quality, stable performance, good design, and great practicality.

Enterprise Strength

SANDAO New Material has employed a senior expert team to guide product planning and R&D. Besides, we have built an advanced and standardized business model. All this promotes product improvement and corporate development.
SANDAO New Material innovates business setup and sincerely provides one-stop professional services for consumers.
Under the enterprise spirit of 'united, hard-working, truth-seeking and innovative', SANDAO New Material constantly gained self-breakthrough during development and achieved the goal to be the forerunner in the industry.
SANDAO New Material has experienced years of wind and rain unconsciously. In the past years, we, despite all the hardships, have exerted ourselves to create more than one miracles in the industry.
SANDAO New Material has a sales network covering from the whole country to many countries and regions such as Southeast Asia and Africa.

Company Advantages
1. MS adhesive series has excellent cost performance. It has superior bonding properties to metals such as copper, aluminum and stainless steel
2. Non-stop work for our MS adhesive series is its big strength. It has a long-term anti-yellowing ability
3. The product has obtained international quality certifications. Water absorption and coefficient of linear expansion of this product are small
4. Huizhou SANDAO New Material Co., Ltd is superior to other companies in MS adhesive series field in terms of scale, financial strength, R&D capability and management level. It has excellent electrical insulation performance
5. With rich experience in outer packing, MS adhesive series will be well protected and no damage will happen. It should be fully cured before realizing its use value

our product

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

Cabinet corner bonding

Electrical bonding

Electronic Components

kitchen

Window bonding

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

MS-SD818 General purpose sealant

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. SANDAO has enough capability to produce MS adhesive series and offer the best service in the market.
2. By giving play to strong points of ms polymer adhesive and ms polymer adhesive, MS adhesive series can maximize the value of it.
3. Huizhou SANDAO New Material Co., Ltd is committed to becoming a comprehensive MS adhesive series provider with global influence. Ask!

Favorable rate

100%

Buyer impression