quality nail free adhesive allpurpose from China for electronic products

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Product Comparison

ms adhesive is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable. ms adhesive has the following advantages over other products in the same category.

Application Scope

SANDAO New Material's ms adhesive is widely applicable in the Manufacturing Chemicals Other Chemicals industry.Guided by the actual needs of customers, SANDAO New Material provides comprehensive, perfect and quality solutions based on the benefit of customers.

Company Advantages
1. The production process of SANDAO polymer adhesive is in compliance with international standards.
2. This product is less likely to accumulate too much heat. Equipped with a heat sink that can quickly absorb the heat generated and dissipates to the surrounding environment.
3. This product is increasingly showing its broad application areas.
4. It is created not only to fulfill the ambitions of customers but also to add value to their business.

our product

allpurpose nail free adhesive from China for electronic products SANDAO-1

SD838 all-purpose nail-free adhesive

SD838 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

allpurpose nail free adhesive from China for electronic products SANDAO-2

baseboard clearance

allpurpose nail free adhesive from China for electronic products SANDAO-3

glass bonding

allpurpose nail free adhesive from China for electronic products SANDAO-4

stone bonding

allpurpose nail free adhesive from China for electronic products SANDAO-5

wall drill bonding

allpurpose nail free adhesive from China for electronic products SANDAO-6

wall gap bonding

allpurpose nail free adhesive from China for electronic products SANDAO-7

window gap bonding

product Performance

Type	SD838
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

allpurpose nail free adhesive from China for electronic products SANDAO-8

SD838 universal nail-free glue

SD838MS universal nail-free adhesive is a new type of modified silane sealant with a low modulus and high elasticity single component.

allpurpose nail free adhesive from China for electronic products SANDAO-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

allpurpose nail free adhesive from China for electronic products SANDAO-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

allpurpose nail free adhesive from China for electronic products SANDAO-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Huizhou SANDAO New Material Co., Ltd engages in nail free adhesive for many years.
2. We are an exporter of record. We are licensed by the Chinese administration. Knowing the rules and regulations of many countries, we deliver only products that are 100% compliant.
3. Huizhou SANDAO New Material Co., Ltd ensure polymer adhesive service for its costumers. Call now! To constantly provide high-end product for customers is SANDAO's principle. Call now!

c******o

SANDAO nail free adhesive is scientifically designed. Correct mechanical, hydraulic, thermodynamic and other principles are applied while designing its elements and the whole machine.

z******l

SANDAO nail free adhesive has passed the following pre-production processes. They are the development of fabric sample, pattern making, correction of pattern, pattern grading, approval of fabric, and testing of fabrics and other raw materials.

j******s

SANDAO nail free adhesive will be inspected to guarantee high quality. It will be scrutinized to eliminate the circumstances of skipping stitches, sparse needle pitch, loose thread, floating thread, and break stitches.

i******l

SANDAO polymer adhesive involves a wide variety of manufacturing processes. They cover foot type collection, CAD pattern design, 3D printing, machining (cutting, heating, pressing, etc.), trimming, and trial clinical application.

j******m

Materials research is essential for the successful SANDAO polymer adhesive design. Its materials will be investigated in terms of breathability, thermal rating, water rating, slip and impact resistance.

e******m

This product has electromagnetic compatibility. EMC testings are performed in it manufacturing to a wide range of EMC standards such as EMC Directive 2014/30/EU.

Product Message

*Name

Phone

*E-mail

*Content

Allpurpose nail free adhesive from China for electronic products SANDAO