| SANDAO

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Application Scope

The silicone rubber produced by SANDAO New Material is widely used in the Manufacturing Chemicals Other Chemicals industry.SANDAO New Material is dedicated to providing professional, efficient and economical solutions for customers, so as to meet their needs to the greatest extent.

Enterprise Strength

SANDAO New Material collects problems and demands from target customers all over the country through deep-going market research. Based on their needs, we keep improving and updating the original service, so as to achieve the maximum extent. This enables us to establish a good corporate image.

Company Advantages
1. SANDAO is manufactured by adopting the most advanced equipment in the rubber and plastic industry for material hardness (shore and durometer) testing.
2. Being well sealed, it serves as a protective shell. It blocks water vapor, dust, etc. from contacting the items being packaged.
3. It has satisfactory durability. Fabric and weaving techniques were selected based on the specific use of the product.
4. The use of this product would contribute to the reduction of energy bills. Its energy efficiency can effectively lower the consumption of energy and decrease energy expenses.
5. The product distinctly adds very little burden on the electricity demand, which contributes a lot in reducing carbon footprint globally.

our product

SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Feature

◪ General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Application

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

Leather bonding

Metal bonding

Plastic bonding

Furniture bonding

Rubber bonding

Silica gel bonding

product Performance

Before curing
Appearance	transparent
Viscosity(mPa.s)	>300
density(g/c㎡)	1.05
After curing
Shear strength(Mpa)	>24
Temperature range（℃）	-55~85
Curing time (s)	15
Maximum filling gap (mm)	0.1

Product details

SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Transparent

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

Green environmental protection

Low odor, no pollution.

Packing

This product is packaged in plastic with 20g/ bottles or 1000g/ bottles;

Use instructions

Using process:
1) Use a dry cloth or abrasive paper to remove surface dust, oil agent, steel embroidery, then wipe and clean with acetone or trichloroethylene.
2) Open the front cover, flick tip by finger, make no residual liquid, and then poke open by using needle.
3) Drop a little glue to the surface, adhesive immediately and keep to hardening, curing time is few seconds to few minutes; reach the practical strength within 30mins, strength, reach the highest strength within 1-2 hours;
4) After use, wipe the tip, cover the lid.

Caution

1. The vapour of this glue will hurt eyes.
2. If hand touched, wash clean by using soap, water, pumice, otherwise it can curing in hand after a while, it will recede after a few days.
3. Avoid contact of eyes and skin. Wash immediately with water and consult a doctor immediately in case of accident.

Packaging and preservation

This product is packaged in plastic with 20g/ bottles or 1000g/ bottles.

The product should be stored in dry shade place (below 25 ℃).

The shelf time is 6 month.

Company Features
1. SANDAO is an excellent supplier of .
2. We have exported products to many countries and regions and have obtained some certifications from exporting countries. This can act as a quality assurance of our products.
3. In Huizhou SANDAO New Material Co., Ltd, satisfaction from our customers is the most important thing. Get more info! The service system of Huizhou SANDAO New Material Co., Ltd is complete and deeply relied by our customers. Get more info! It is essential for SANDAO to stick to the corporate culture of to keep forward. Get more info! The policy of is the business core for SANDAO. Get more info!

DESCRIPTION

Radiator Flux-AD is a high activity, zinc chloride-based water-soluble flux specifically designed for Torch flame soldering and brazing application method to deliver strong solder flow soldering/Brazing on automotive copper/brass radiator and heater core. This flux is being formulated in concentrated form, allowing maximum saving of dilution with water by the end user. This formulation is designed to produce very clean soldered/Brazed surface and minimal residues after soldering.

APPLICATION

After soldering/Brazing the post residues must be washed/cleaned with preferably warm water (50-60)C.

PHYSICAL PROPERTIES

Appearance Clear liquid

Specific Gravity @25C 1.30 ± 0.02

SAFETY PRECAUTIONS

Radiator Flux-AD is corrosive to steel and should be stored in HDPE plastic containers. Use Radiator Flux-AD flux only with adequate ventilation / exhaust system, avoid skin contact and/or breathing fumes vapors.

STORAGE

Store in well-ventilated and no direct sunshine area.

PACKAGING

30,60,125 and 250 kg HDPE Jar and Drum